The safe use of the product is something that we must all pay attention to. So what do we need to pay attention to after the continuously variable speed reducer starts to run, those links are what we must do, please see below:
One. Before installing the stepless speed reducer, check whether the motor and the speed reducer are intact and strictly check whether the dimensions of the parts connected to the motor and the stepless speed reducer match. Here is the positioning boss of the motor, the input shaft and the recess of the speed reducer. Slot and other dimensions and fit tolerances.
two. Connect the motor and reducer naturally. When connecting, you must ensure that the concentricity of the output shaft of the reducer and the input shaft of the motor are consistent, and the outer flanges of the two are parallel. Like the inconsistency, it will cause the motor shaft to break or the reducer gear to wear.
three. Unscrew the screw on the dust hole on the outside of the reducer flange, adjust the PCS system clamping ring so that the side hole is aligned with the dust hole, and insert the hexagon socket to tighten it. After that, remove the motor shaft key.
It should also be noted that before installation, wipe the rust-proof oil on the motor input shaft, positioning boss, and reducer connection area with gasoline or zinc-sodium water. During installation, it is strictly forbidden to hit with a hammer, etc., to prevent excessive axial or radial forces from damaging the bearings or gears. Be sure to tighten the mounting bolts before tightening the tightening bolts.
Before the motor is connected to the reducer, please firstly vertical the motor shaft keyway and the tightening bolt. In order to ensure uniform force, please screw on the mounting bolts at any diagonal position first, but do not tighten, then screw on the other two diagonal mounting bolts, and finally tighten the four mounting bolts one by one. The correct installation between the stepless speed reducer and the mechanical equipment is similar to the correct installation between the reducer and the drive motor. The key is to ensure that the concentricity of the output shaft of the reducer is consistent with that of the driven shaft.
The above are some of the knowledge provided by Shanghai Yulong Reducer Co., Ltd. stepless speed reducer for the safe use of stepless speed reducer. For more information about other products, please visit our official website: www.yulongjsj. com
|Things to know about bearings for helical gear reducers|
|Master the 4 using skills of Shanghai reducer to extend its service life|
|Price and technology are the biggest obstacles to the development of Shanghai reducers in China|
|How can we buy with confidence when we do n’t understand the continuously variable transmission?|