??互搏体育??

Sitemap RSS Subscription Collection
Shanghai Yulong Reducer Co., Ltd. official website logo

Your location: ??互搏体育?? > Industry News > Details

details

Talking about the oil change steps of the four series of continuously variable transmissions

Source: rubyrad.com Release time: 2015-09-03

Every kind of equipment has been in use for a period of time, so it is essential for the oil change. The four series of CVTs are also the same. In order to make your equipment work better, we will give you Introduce his oil change steps:
1. Cut off the power supply to prevent electric shock, wait for the four series of continuously variable transmissions to cool down and start changing oil until there is no danger of burning;
2. Put an oil pan under the oil drain plug;
3. Open the oil level plug, ventilator and oil drain plug;
4. Eliminate all oil;
5. Install oil drain plug;
6. Tighten the oil level plug and ventilator.
Finally, we have to remind everyone to check the oil level at the oil level plugs of the four series of continuously variable transmissions to keep the oil amount consistent with the installation position. Finally, install the oil drain plug to complete the entire oil change step. This will not only ensure the failure of the equipment, but also bring greater benefits to everyone.

Related Information

Brand-building skillful helical gear reducer is comprehensively valuable
Correct use of continuously variable transmission, ten points need attention
What if the CVT is overloaded?
MB stepless transmission needs to choose different structural forms according to different working environments

Related Products

Official homepage | Company profile | Products | News | Workshop equipment | Electronic samples | Contact
Reducer model recommended products: stepless speed reducer | stepless speed reducer | gear reducer | helical gear reducer | SWL worm gear screw lift
Copyright rubyrad.com .
Shanghai public network Shanghai ICP No. 11002774-1
七乐彩 欢乐拼三张 欢乐拼三张 真人游戏平台注册