Why is the helical gear reducer more and more popular in the reducer industry? This is beyond our comprehension. To understand why helical gear reducers are so popular is not what they used to be. The following is a detailed description of the blow!
The helical gear can be regarded as a spur gear that is made of a set of thin toothed gears. In this way, the contact of each piece is at a different part of the tooth profile, which has the effect of compensating the error of each thin gear. The elasticity of the teeth is very effective, so the result is that the gear teeth with an error of less than 10MM can make the error average, so under load, it can run as smoothly as the gear teeth with an error of 1MM. Because at any instant, two teeth will mesh about half the time, which brings additional benefits in terms of strength, so stress can be built on 1.5 times the tooth width, rather than on the basis of one tooth width.
|Brand-building skillful helical gear reducer is comprehensively valuable|
|Correct use of continuously variable transmission, ten points need attention|
|What if the CVT is overloaded?|
|MB stepless transmission needs to choose different structural forms according to different working environments|