I don't know if you have ever experienced such a phenomenon. When you operate a helical gear reducer , half of the operation suddenly runs out of oil. How do you cope with it when this happens? Xiaobian will analyze with you today how to change the oil if a helical gear reducer needs to be changed?
1. The user shall have reasonable use and maintenance rules and regulations, and shall carefully record the operation of the reducer and the problems found during the inspection, and the above provisions shall be strictly implemented.
2. When changing oil, wait for the reducer to cool down until there is no danger of burning, but it should still be kept warm, because after complete cooling, the viscosity of the oil increases and it is difficult to drain the oil. Note: Cut off the power supply of the transmission to prevent inadvertent power
3． During work, when you find that the temperature of the oil rises above 80 ℃ or the temperature of the oil pool exceeds 100 ℃ and abnormal noise occurs, you should stop using it, check the cause, you must eliminate the fault, and then continue the operation after changing the lubricant.
4． After 200 to 300 hours of operation, the first oil change should be performed. In the future use, the quality of the oil should be checked regularly. The oil mixed with impurities or deteriorated must be replaced in time. Under normal circumstances, for a gearbox that has been working continuously for a long time, it should be replaced with a new oil according to 5000 hours of operation or once a year. The gearbox that has been out of service for a long period of time should be replaced with a new oil before the gearbox is restarted. , Must not be mixed with oils of different brands, oils of the same brand but different viscosity are allowed to be mixed.
It seems that it is still dangerous to change the oil of the helical gear reducer. Everyone must carefully change the oil of the helical gear reducer according to the above related skills.
|Have you checked the fail-safe of the continuously variable transmission?|
|Shanghai reducer leaks oil, how to deal with it?|
|The key to knowing whether a reducer company can develop is to look at technology and innovation|
|The correct maintenance method of helical gear reducer?|