??互搏体育??

Sitemap RSS Subscription Collection
Shanghai Yulong Reducer Co., Ltd. official website logo

Your location: ??互搏体育?? > Company News > Details

details

The reason why the temperature of the stepless speed reducer is too high cannot be underestimated

Source: rubyrad.com Release time: 2015-07-02

If the continuously variable speed reducer heats up during use and the temperature is too high, in general, this may be a problem with the eccentric bearing and a failure. Of course, this is only a general situation, and other factors need to be considered, such as the newly purchased machine, there may be unreasonable assembly, or there may be problems. Of course, this knowledge is the reflection that must be formed in the mind after the temperature failure of the reducer is discovered, but this does not mean that the problem is due to this reason. For the temperature problem of the stepless speed reducer, there may be another important factor to consider, which is the problem of lubricating oil. If the reducer lacks lubricating oil, the above problems may also be caused. This requires the right remedy and local conditions.
Of course, there are other reasons that need to be considered. If the continuously variable speed reducer is often overloaded, it may also cause the temperature to be too high. However, these factors require everyone to constantly analyze and eliminate the selection to find the most correct answer. The reason why the temperature of the stepless speed reducer is too high has been found, and then there are solutions. There are many solutions to things, but the most direct and simplest, and the most reasonable should be the best method. This belongs to the reducer. The basic theory of technology is no longer stated here.
In short, for the problem of excessively high temperature of the continuously variable speed reducer, first find out the reason, such as the above-mentioned possibilities. If these reasons are ruled out, then look for other factors that may affect the temperature of the reducer. , Then give the right solution, give a solution, and implement it. If you do this, you will be able to handle the failure of the reducer easily.


Related Information

It is not a bad thing that Shanghai helical gear reducer manufacturers have a certain market competitiveness
Do you know the three actions of the reducer?
Helical gear reducers are gradually recognized by the industry, but there is still room for development
Three major reasons for the output of the continuously variable transmission

Related Products

Official homepage | Company profile | Products | News | Workshop equipment | Electronic samples | Contact
Reducer model recommended products: stepless speed reducer | stepless speed reducer | gear reducer | helical gear reducer | SWL worm gear screw lift
Copyright rubyrad.com .
Shanghai public network Shanghai ICP No. 11002774-1
七乐彩 欢乐拼三张 欢乐拼三张 真人游戏平台注册